Извещатель мультисенсорный c доп. сенсором СО FDOOTC241
Артикул: S54311-F1-A1 |
Добавить в корзину
Характеристики
Свойство | Значение |
Рабочее напряжение | 12... 33 VDC |
Диапазон рабочих температур | -20... +50 °C |
Диапазон температур хранения | -20... +55 °C |
Ток в дежурном режиме | 320... 400 мкА |
Внешний индикатор тревоги | 2 без звукового основания 1 с звуковым основанием |
Совместимость системы | FS20 (MP2.1) |
Протокол связи | FDnet |
Относительная влажность | 15… 90 % (0… 99 % Допускается кратковременная конденсация влаги) |
Размеры (Ø x В) | 100 x 46 мм |
Цвет | белый, ~RAL 9010 |
Стандарт | CEA4021, EN54-5, EN54-7, EN54-17, VdS2806, EAC, ГОСТ Р |
Степень защиты | С основанием – IP43‚ с приставкой для основания – IP44 |
Описание
Другие извещатели и периферийные устройства Sinteso EN
Инструкции:
FDOOTC241 with base FDB221, FDB221-AA forsurface-mounted and recess-mounted cable entries
FDOOTC241 with base FDB222 for flush mounting.For recess-mounted cable entry only
Извещатель мультисенсорный c доп. сенсором СО FDOOTC241 - For very early and reliable detection of emerging fire, due to analysis of the three criteria smoke, heat and gas. Very fast response to all carbon monoxide (CO) generating fires and very early and reliable alarming in environments with deceptive phenomena. Works according to the scattered-light principle with two sensors, optical forward and backward scattering. Opto-electronic sampling chamber blocks disturbing extraneous light but optimally detects both dark and light smoke particles. Two additional heat sensors and an additional CO sensor increase the fire detector’s immunity to deceptive phenomena and the response characteristics of the fire detector. Selectable detection behavior by application-specific ASA parameter sets. The additional CO analysis makes it exceptionally fast and ideal for applications where the occupants make speed of detection critical (e.g. nursing homes, hospitals, sheltered accommodations etc.).
The base must be ordered separately.
Отзывы
Нет отзывов